Drywall is one of the sturdiest and long lasting building materials. Drywalls can be used for walls as well as for ceilings. Drywall is basically a large and rigid sheet made of two paperboards that have gypsum sandwiched in between. The combination of the paperboard layers with gypsum sandwiched in between allows for a solid wall panel that is strong, light, and does not burn when exposed to naked flames. It is a finished product that only requires installation. This is widely used in the interior of the homes as well as commercial buildings. It is great for remodeling your building without having to tear down the whole thing.
The most beneficial aspects of using drywall in your building include
- Cost effectiveness
- Fire resistance
- Easy installation
- Long lasting
- No drying time
This articles will give you the most useful tips for the accurate installation of drywall in your home or commercial setup.
Must-have tools
Before you start to install drywall in your home, you must have some tools with you to make the process smooth. A 4-in-1 screwdriver, drill (cordless is best), mushroomed hammer, spirit level, chalk, drywall saw, safety glasses, pry bar, spackle and taping knives, tape measure, drywall tape, step ladder or chair, screw gun, and a T-square for precision.
Materials needed
drywall sheets measured to size, drywall screws (variety of lengths depending on the depth of drywall being used), and drywall nails.
Measure the Wall
Before you start working on your drywall, it is extremely important to measure the walls accurately. It is a crucial step that must be carried out even before you buy drywalls. In order to know what size drywall sheet you need, simply measure from the middle of the joist to the end of the ceiling, and get your sheets cut to length.
Take the time to mark fastening guidelines every 40 cm or 12 inches from the end of your sheet with your drywall square. When getting your drywall panels cut to size, shorten them by 1 cm for easier fitting.
Selecting and Buying Drywall
Drywall installation process requires three basic thicknesses and types of gypsum material. Take your measurements with to the hardware shop for further insights from those with experience. Circumstantial information such as window placement, interior versus exterior, and curved walls will have to be determined prior to purchase the drywall panels.
Focus on finding the correct measurements for the space you are wanting to install drywall and opt for a thickness that suits the needs of the installation environment. Your panels will act as slabs that cover exposed sections of the wall, so make sure you’ve got the dimensions just right.
These are some of the basic tips that would help you with your drywall installation and repair process. It is better to take help of professional while executing such projects.
Cut according to the measurements
For drywall installation the sheets must be measured properly. After measuring the framing spacing to determine the correct board length, mark the board for cutting. Use a utility knife to score along the line and into the core of the board. Snap the board away from the cut, and, if needed, run the knife along the break to cut the back paper as well to ensure a clean break.
Stag vertical joints
Create a stronger wall and make concealment during finishing easier with staggered vertical end joints. Hang the boards at right angles and ensure their edges and ends are touching while taking care not to force them into place. This step is also important for drywall repair.
Storage
Last but not the least, store all the sheets at the clean and dry place to avoid any kind of damage to the sheets. Inspecting each sheet before installing is also necessary.